Error code
Bertazzoni dishwasher error code FF
Bertazzoni dishwasher error code FF: The machine did not get the water it asked for. The maker names it a water inlet system failure. What the maker publishes about it, what you can try yourself, and when it needs a technician.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code FF, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
FF
The machine did not get the water it asked for. The maker names it a water inlet system failure.
or call (305) 985-4136
What it narrows down to
The machine did not get the water it
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the dishwashers
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Overflow. The machine has found water where there
The machine could not discharge its water. The
Water is arriving continuously — the machine is
Pressure system failure — the machine can no
The heater sensor is failed — the machine
Overheating. The machine has measured a water temperature
Heater error — the heating element or its
Divisor position error — the valve that sends
High voltage failure. This one is about the
The same digits mean different things on different equipment. Search the full code list
In more detail
About Bertazzoni dishwasher error code FF
What FF means on a dishwasher
The machine did not get the water it asked for. The maker names it a water inlet system failure. That comes out of the dishwashers manual this maker publishes for the machine, and it is one of only three documents in the whole current catalog that carries a code table at all.
What to do
- Check that the supply tap behind or under the machine is fully open and that water is actually reaching it.
- Close the tap, take the inlet hose off it and clean the small filter in the hose end — it silts up and it is the commonest cause.
- If the code returns after that, the fill valve or the sensing behind it is the cause and it is a service call.
What the repair is
Conditions like this one end at Dishwasher drain & filter repair more often than anywhere else. The figure on that page is a starting point; the exact cost is confirmed after an on-site diagnostic and agreed in writing before anything is opened.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards