Error code
Bertazzoni dishwasher error code HI
Bertazzoni dishwasher error code HI: High voltage failure. This one is about the electricity arriving at the machine rather than about the dishwasher. What the maker publishes about it, what you can try yourself, and when it needs a technician.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code HI, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
HI
High voltage failure. This one is about the electricity arriving at the machine rather than about the dishwasher.
or call (305) 985-4136
What it narrows down to
High voltage failure. This one is about the
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the dishwashers
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The machine did not get the water it
Overflow. The machine has found water where there
The machine could not discharge its water. The
Water is arriving continuously — the machine is
Pressure system failure — the machine can no
The heater sensor is failed — the machine
Overheating. The machine has measured a water temperature
Heater error — the heating element or its
Divisor position error — the valve that sends
The same digits mean different things on different equipment. Search the full code list
In more detail
About Bertazzoni dishwasher error code HI
What HI means on a dishwasher
High voltage failure. This one is about the electricity arriving at the machine rather than about the dishwasher. That comes out of the dishwashers manual this maker publishes for the machine, and it is one of only three documents in the whole current catalog that carries a code table at all.
What to do
- Do not keep restarting it. A supply problem will not improve by being asked again.
- Mention any other appliance on the same circuit behaving oddly — this is occasionally an electrician's job rather than an appliance repair.
Write the code down before you clear it, and photograph the display if you can. On a machine that only shows a problem intermittently, that is the one piece of evidence that disappears the moment power is cycled, and it is the first thing anybody will ask you for.
What the repair is
Conditions like this one end at Dishwasher control & electronics repair more often than anywhere else. The figure on that page is a starting point; the exact cost is confirmed after an on-site diagnostic and agreed in writing before anything is opened.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards