Error code
Bertazzoni refrigerator: The water filter symbol, flashing or beeping
Bertazzoni refrigerator — an indicator rather than a code. A timer rather than a measurement. On the built-in columns the filter symbol flashes and beeps at 180 days; on the French-door machines the icon lights at 330 days and starts flashing at 360. Neither is reading the filter — both are counting.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code Water filter symbol, from the manufacturer's own documentation
This code has no number, because this equipment has no display to put one on. The appliance signals it instead — an alarm, a symbol or a pattern of lights — and what it means is recorded in the documentation that ships with it.
The code
Water filter symbol
A timer rather than a measurement. On the built-in columns the filter symbol flashes and beeps at 180 days; on the French-door machines the icon lights at 330 days and starts flashing at 360. Neither is reading the filter — both are counting.
or call (305) 985-4136
What it narrows down to
A timer rather than a measurement. On the
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the refrigerators
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The refrigerator compartment temperature sensor is failed. The
A communication problem between the machine's own boards.
Ambient temperature problem — the sensor that reads
Humidity sensor problem.
Ice maker problem.
Ice maker sensor problem.
Not a problem. A door left open for
The same digits mean different things on different equipment. Search the full code list
In more detail
About Bertazzoni refrigerator: The water filter symbol, flashing or beeping
This is an indicator, not an error code
A timer rather than a measurement. On the built-in columns the filter symbol flashes and beeps at 180 days; on the French-door machines the icon lights at 330 days and starts flashing at 360. Neither is reading the filter — both are counting.
It is on this page because it is what somebody is actually looking at when they go searching. Most of this maker's equipment publishes no code at all, and an appliance that flashes at you is still telling you something — it simply is not telling you a number.
If you are here because you searched for the Bertazzoni refrigerator water filter, the short answer is six months and a counter that has to be cleared by hand.
What to do
- Change the filter. Six months is the maker's interval and on South Florida water it is not generous.
- Reset the counter afterwards, or the machine goes on believing the old filter is fitted. On the columns it is a five-second hold of the select control; on the French-door machines a three-second hold of the filter control.
- Flush the new filter for several minutes before drinking or making ice from it.
- A restricted filter shows up in the ice first — small, hollow, slow cubes — long before the water tastes different.
What the repair is
Conditions like this one end at Column panel & door alignment more often than anywhere else. The figure on that page is a starting point; the exact cost is confirmed after an on-site diagnostic and agreed in writing before anything is opened.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards