Error code
Bertazzoni freezer column error code E2
Bertazzoni freezer column error code E2: The freezer compartment temperature sensor is failed. What the maker publishes about it, what you can try yourself, and when it needs a technician.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E2, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
E2
The freezer compartment temperature sensor is failed.
or call (305) 985-4136
What it narrows down to
The freezer compartment temperature sensor is failed.
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the freezer columns
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The frost sensor on the freezing side is
The same digits mean different things on different equipment. Search the full code list
In more detail
About Bertazzoni freezer column error code E2
What E2 means on a freezer column
The freezer compartment temperature sensor is failed. That comes out of the refrigeration with an error-code display manual this maker publishes for the machine, and it is one of only three documents in the whole current catalog that carries a code table at all.
What to do
- The maker's own note with this table is worth repeating: the appliance will usually go on cooling and freezing while showing one of these, so this is not an emergency.
- Note the code before it is cleared, and note whether temperatures have actually drifted — a sensor problem with correct temperatures and one with a warm cabinet are different appointments.
- None of these is an owner repair; they are sensing and control problems and they are diagnosed with a meter.
Write the code down before you clear it, and photograph the display if you can. On a machine that only shows a problem intermittently, that is the one piece of evidence that disappears the moment power is cycled, and it is the first thing anybody will ask you for.
What the repair is
Conditions like this one end at Freezer column repair more often than anywhere else. The figure on that page is a starting point; the exact cost is confirmed after an on-site diagnostic and agreed in writing before anything is opened.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards