--- title: "Brass burner service cost" description: "Bertazzoni brass burner service cost: twenty machines in this line carry brass burners rather than sealed steel." url: "https://bertazzonimiami.support/repair-cost/brass-burner-service/" date_modified: "2026-08-27" --- # Bertazzoni brass burner service cost ### Why brass gets its own figure Because it is a different object from a sealed steel burner and it is looked after differently. **Ten ranges and ten cooktops in this catalog carry brass**, and on those the burner is a serviceable assembly rather than a sealed unit: the cap lifts, the crown comes out, the ports are individually clearable. A sealed burner that misbehaves is usually replaced. A brass one is usually cleaned, and the two should not carry the same price. ### What this is not It is not a repair and it is not a polish. We are not restoring the appearance of the metal and we will say so plainly if that is what you are after. ### What is included Caps and crowns off and cleaned, ports cleared without enlarging them, the ignitor gap cleaned, everything seated true, and each burner run and watched from full to simmer. **Exact cost is confirmed after an on-site diagnostic.** What moves this figure The 20 models with brass burners: 10 ranges, 10 cooktops Caps, crowns, ports and flame set — the finish left alone The cheapest cooking row on this site, on purpose How many burners A single burner behaving badly and a whole top that has never been serviced are different appointments. Doing the whole top at once costs far less per burner than coming back for the next one. How long since the last one Brass that has been cleaned regularly comes apart, washes and goes back. Brass that has had five years of boil-overs baked onto it takes soaking and patience, and that is time. Whether anybody has attacked the finish Abrasive pads and oven cleaner take the surface off brass and it does not come back. We will not restore a finish and we will not pretend to; what we service is how the burner runs. Whether a port has been opened out A port cleared with wire or a drill is a permanently changed flame. That is a replacement rather than a service and you will be told which one you are looking at before anything is charged. Why brass gets its own figure Because it is a different object from a sealed steel burner and it is looked after differently. Ten ranges and ten cooktops in this catalog carry brass, and on those the burner is a serviceable assembly rather than a sealed unit: the cap lifts, the crown comes out, the ports are individually clearable. A sealed burner that misbehaves is usually replaced. A brass one is usually cleaned, and the two should not carry the same price. What this is not It is not a repair and it is not a polish. We are not restoring the appearance of the metal and we will say so plainly if that is what you are after. What is included Caps and crowns off and cleaned, ports cleared without enlarging them, the ignitor gap cleaned, everything seated true, and each burner run and watched from full to simmer. Exact cost is confirmed after an on-site diagnostic. ### How often should brass burners be serviced? Once a year on a kitchen that cooks most days, and after any serious boil-over. The point of doing it on a schedule is that a clean burner does not become an ignition call. ### Will you make the brass look new again? No. Brass darkens with heat and that is the material behaving normally, not damage. We service how the burner runs; we do not refinish it, and anybody who offers to is likely to be using something abrasive on it. ### Is this cheaper than an ignition repair? Yes, deliberately. It is the lowest cooking figure on the site, because it is the job that prevents the more expensive one and it should be easy to say yes to. --- **[Read full article: Brass burner service cost](https://bertazzonimiami.support/repair-cost/brass-burner-service/)**