--- title: "Bertazzoni models, by number: what goes wrong on each." description: "Bertazzoni range models with the cooktops, ovens, hoods, refrigeration and dishwashers: 180 numbers, and what each one needs." url: "https://bertazzonimiami.support/models/" date_modified: "2026-08-27" --- # Models archive ## Bertazzoni models, by number: what goes wrong on each. Find your number below, or read where to find it on the unit. Each page says what that machine is, what tends to go wrong with it, and what the work costs here. 180 — models people ask about by number 3 — counties covered end to end OEM — parts available on order from $95 — diagnostic, credited to the repair ## The numbers people ask us about Each page lists what owners of that model actually search for, what the machine is, and where those symptoms usually lead. No model pages published yet. Call with the number from the data plate. ## Where the model number is on your unit It depends on the appliance. Inside the fresh food compartment on a refrigerator, usually high on the left or right wall. On the edge of the door on a dishwasher. On the frame inside the door on a wall oven or a range. Behind a filter on a hood. Inside the door frame on a microwave, a washer or a dryer. Behind the grille at the bottom on an undercounter cabinet, and inside the door frame on a wine cellar. Take a photograph rather than writing it down. The full number includes the letters after the digits — those decide which parts fit, and they are the part people misread most often. ## Or start from the symptom If you do not have the number to hand, start from what the unit is doing. Every symptom page says what to check first and when it stops being a five-minute job. ## This is a list of what people ask about, not of what we repair. 180 numbers have pages here because those are the ones people search for by number. We work on the rest of the range as well — the pages simply follow demand rather than the catalog. Tell us the number from the data plate and what the unit is doing, and we will tell you what the machine is, what the symptom usually points at, and what the work involves. **Call **, or send a photograph of the plate through the form above. ## Questions about models and parts Is a twenty-year-old unit still worth repairing? — Usually, yes. These were built to be repaired, and a legacy cabinet in good condition with sound cabinetry is worth keeping. Where it stops being worth it is when the work approaches what the unit is worth, or when a second major failure is already visible — and we will say so on the visit rather than after. Can you still get parts for the older units? — For most of what fails, yes — OEM parts are available on order, though legacy parts can take a few days to source. That is why we confirm a part is the problem before ordering it rather than after. Why do you not list the specifications for each model? — Because we cannot verify them. Capacity, dimensions and production years published second-hand are wrong often enough that a table of them would be a liability, and inventing one would break our own rule about publishing only what we can stand behind. What we do publish is what the number means for the repair. The number on my unit has letters after it. Does that matter? — Yes, for parts. The digits identify the family; the letters identify the configuration, and two units sharing the same digits can take different components. Photograph the whole plate and we will read it from there. Do you work on the current range as well? — Yes, the whole current range. These pages exist because a number is what people search by; everything else this maker sells is covered on the appliance pages. ## What a Bertazzoni model number tells you, and what it does not ### The number is the machine. The series often is not This maker groups its appliances into **Professional**, **Master**, **Heritage** and **Modern** series, and it is tempting to treat that as a specification level the way other makers do. Here it frequently is not. **Seventy-four of the hundred and eighty model numbers in the current US catalog are published under two or three series at once** — the same number, the same title, listed in more than one place — because the series is largely a design language rather than a different machine. For a repair that means the series name on the showroom tag tells us very little, and the number on the rating plate tells us everything. It is also why no figure on this site moves with the series. ### Where the plate is, appliance by appliance It is never anywhere convenient. On a **range** it is usually behind the kick panel at the floor, which means kneeling and a phone torch. On a **wall oven** it is inside the door frame, visible with the door open. On a **cooktop or rangetop** it is on the underside, which means a phone held up into the cabinet below. On **refrigeration** it is on the interior wall of the cabinet. On a **hood** it is behind the filters. A photograph of it beats reading it out, because these numbers contain letters and digits that sound alike on a telephone. ### What the catalog is actually made of Thirty-seven ranges and thirty-seven hoods lead it — this maker expects the two to be bought together, and it is why ventilation is a fifth of everything it sells. Then thirty-four cooktops and rangetops, thirty refrigerators, eighteen wall ovens, eight dishwashers, five freezer columns, four wine cellars, four microwaves, two warming drawers and a single built-in coffee machine. Cooking and ventilation are the overwhelming majority, which is the shape of the company rather than an accident of the catalog. ### Why a model number changes what a repair costs Three ways, and none of them is the badge. It decides whether the machine is **gas, induction or dual-fuel**, which is the largest single split in this line and points a diagnosis in completely different directions. It decides whether the appliance is **built into cabinetry** or stands free, which is planned time rather than a surprise. And it decides **parts availability** — common gas components are widely available and frequently not model-specific at all, while a control board for a particular machine is ordered against that number and checked before anything is promised. ### The two numbers that are not a model number The **serial number** beside it dates the appliance and is worth photographing at the same time. And a number ending in something like */26* or */23* is a revision marker rather than a different machine — it usually matters to a parts lookup and rarely to a diagnosis. ## Send the plate, and what it is doing. A photograph of the data plate and a line about the symptom is enough for us to say what is likely and what it should cost. --- **[Read full article: Models archive](https://bertazzonimiami.support/models-archive/)**