---
title: "Bertazzoni dishwasher error code F2"
description: "Bertazzoni dishwasher error code F2: The machine could not discharge its water. The maker names the discharge hose and the filters as what to look at."
url: "https://bertazzonimiami.support/error-codes/error-code-f2-dishwasher/"
date_modified: "2026-08-27"
Appliance type: "Dishwashers"
---


# Bertazzoni dishwasher error code F2

### What F2 means on a dishwasher

The machine could not discharge its water. The maker names the discharge hose and the filters as what to look at. That comes out of the dishwashers manual this maker publishes for the machine, and it is one of only three documents in the whole current catalog that carries a code table at all.

### What to do

- Cancel the program so the machine is not sitting on a failed cycle.
- Take the filter assembly out, wash it, and clear the sump underneath it by hand — it lifts out without tools.
- Check the drain hose is not kinked or trapped, and if a waste disposer was fitted recently, that its dishwasher inlet plug was knocked out.
- If water still stands after that, the drain pump is obstructed or failed.

### What the repair is

Conditions like this one end at [Dishwasher drain & filter repair](https://bertazzonimiami.support/services/dishwasher-drain-and-filter-repair/) more often than anywhere else. The figure on that page is a starting point; the exact cost is confirmed after an on-site diagnostic and agreed in writing before anything is opened.

What this one means

What F2 means on a dishwasher

The machine could not discharge its water. The maker names the discharge hose and the filters as what to look at. That comes out of the dishwashers manual this maker publishes for the machine, and it is one of only three documents in the whole current catalog that carries a code table at all.

What to do

Cancel the program so the machine is not sitting on a failed cycle.

Take the filter assembly out, wash it, and clear the sump underneath it by hand — it lifts out without tools.

Check the drain hose is not kinked or trapped, and if a waste disposer was fitted recently, that its dishwasher inlet plug was knocked out.

If water still stands after that, the drain pump is obstructed or failed.

What the repair is

Conditions like this one end at Dishwasher drain & filter repair more often than anywhere else. The figure on that page is a starting point; the exact cost is confirmed after an on-site diagnostic and agreed in writing before anything is opened.

---

**[Read full article: Bertazzoni dishwasher error code F2](https://bertazzonimiami.support/error-codes/error-code-f2-dishwasher/)**